Tuesday, August 31, 2010

Swift with roll cage

Suzuki Swift Sport with roll cage.



Sport Rims Changed

After looking for sometime, finally I had found a set of new rims for my Swift.
I had choosen the new 15 inch Advanti Storm Series with PCD 4x100 which weight 4.9kg each.
The rims was newly launch and advertised on August's Hypertuned Magazine too.
BTW I found the seller through online forum; his name is Ah Kit. He is one of the big supplier for sport rims for local sport rims shop too.
One of his shop located at Jalan Gombak, KL. He is a very kind and friendly seller; he offer great price for sport rims and tires too.
You may look for his shop at:
117, Batu 4 1/2, Jalan Gombak 53000, KL.
Ah Kit 012-3331503 email darkforcer2002@hotmail.com
Various sport rims display in his shop

My stock rims - which is made by Enkei and weight about 7+kg

Advanti Storm Series - old version
Advanti Storm Series - new version with 10 spokes
The new Advanti Storm Series sport rim that I chosen.

I have not snap photos of my Swift with the new sport rims; but I think it looks cool with the new rims...
Stay tuned...

BIMOTA DB8

BIMOTA DB8
BIMOTA DB8BIMOTA DB8

BIMOTA DB8 ENGINE SPECS
Source: Ducati 1198 Testastretta Evoluzione, 4V 90°Twin-Cylinder
Displacement: 1198.4 cc
Cooling System: Liquid Cooled
Compression Ratio: 12.7±0.5:1
Maximum Power: 170 HP @ 9750 rpm
Maximum Torque: 96.9lbs•ft @ 8000 rpm
Exhaust System: 2-1-1, stainless steel

BIMOTA DB8 CHASSIS SPECS
Frame: Welded 39NiCrMo4 Tubing and Machined 6082 Aluminium Alloy Plates
Wheelbase: 1435 mm
Front Suspension: Marzocchi USD forks DLC fully adjustable
Rear Suspension: Extreme Tech Monoshock fully adjustable
Fuel Tank: 4.23 gallons (1.05 gallon reserve)
Total Weight: 178kg (392lbs)
Steering Angle: 25°
Seat Height: 800 mm
Overall Length: 2100 mm
Overall Width: 700 mm
Overall Height: 1115 mm
Ground clearance: 135 mm
Front Brake: Double 320mm Brembo floating disc, 4-pistons radial Brembo callipers, radial pumps
Rear brake: 220mm floating disc, 2-piston Brembo calliper
Front Tire: 120/70 ZR 17 Dunlop Sportmax GP Racer
Rear Tire: 190/55 ZR 17 Dunlop Sportmax GP Race

Ilmor Moto 2

Ilmor Moto 2Ilmor Moto 2

The decision of the Grand Prix Commission to kill off the 250cc class and replace it with a four-stroke formula was met with a great deal of scepticism by both fans and followers of motorcycle racing. Apart from the sadness at the loss of the two strokes, there was some doubt whether the bikes could be built as cheaply as the Grand Prix Commission hoped, negating the aims of making cheaper racing. However, there is no doubt that there is real interest in the four-stroke 600cc series. Moriwaki have already exhibited a prototype at a couple of motor shows, and Ronald Ten Kate expressed an interest in the series in an interview with


MotoGPMatters.com at Portimao last year. Today, Ilmor said that they, too, are interested in the new class. Speaking to MotoGPMatters.com, Steve Miller, managing director of the British-based company said that they are watching developments closely. "We are very interested in the class," Miller said. "We would definitely like to be involved, if the series is run seriously and the organization behind it is good." The framework of the new series - a 600 cc four-stroke engine with steel spring valves and a rev limit, fitted into a prototype chassis - would seem to suit Ilmor right down to the ground. The Northamptonshire-based engineering firm, founded around the engineering genius of Mario Illien, has built a reputation for building and developing racing engines over the years. Their last venture into MotoGP - the remarkable Ilmor X3 800cc bike - foundered on a lack of sponsorship. But the firm's prowess as an engine builder is beyond question, and there is no doubt they could design an engine to fit the new regulations. And cost need not be an issue: "We think we can build a coil spring engine for that money," Miller replied, when asked whether Ilmor could build an engine within the 20,000 euro claiming rule budget, "But whether that would include a gearbox or not is debatable. Obviously, it would depend on what the competition were doing, and we'd have to see where they are first."


Miller was not against a claiming rule, though he saw there could be problems. "We'll see whether it's effective. If they make it too cheap, then people will claim engines all the time, but if it's too expensive, then no one will ever use it, and there would be no point having the claiming rule." Despite Ilmor's optimism about the class, Miller was not convinced that the new class would go ahead as planned. "We're not at every race any more, so we're out of the loop a little," Miller told MotoGPMatters.com, "But we're not even sure the series will go ahead. The latest we've heard is that the economic crisis has made everyone think again."

Injection System

Injection System

Injection System

Injection System

Injection System

Injection System

Injection System

Injection System

Injection System
kind of injection system

Awesome Underground Aloni House